A selection of recent steel fabrication and installation projects. Full portfolio available on request, including drawings and site photos for similar work.
Long run of red oxide primed columns and beams forming the colonnade and canopy steel to a new apartment and retail development, craned in and bolted off the precast structure bay by bay.
Steel frame for a rooftop extension built off a concrete slab, with braced portals, purlin cleats and hot dip galvanised fixings set out to take a lightweight roof over the existing building.
Two tier steel frame erected inside a working industrial unit to form an office mezzanine, with bolted moment connections, base plates resin fixed to the slab and a clean edge for decking.
Run of red oxide primed portal frames fabricated and erected across a new housing scheme, each frame bolted to cast-in base plates over rising block work.
Red oxide primed portal frames and a trussed ridge erected over a rear house extension, craned into place, bolted at the apex and eaves and set out to carry the new roof and open gable glazing.
Traditional style balustrade to granite entrance steps on a period building, with knuckled bar uprights, moulded newels and a continuous curved handrail finished in satin black.
Three leaf driveway gates built from a heavy black steel frame with angled aluminium louvre infill, giving full privacy with air flow, hung off brick piers on adjustable pin hinges.
Spear top railings made to suit a restored granite boundary wall, raked panel by panel to follow the slope of the road and core drilled into the coping before a satin black finish.
Pair of arched top driveway gates with cast fleur de lis heads and a decorative mid band, hung on heavy hinge posts built into the brick piers and set up for automation.
Full front boundary set for a private house: driveway gates, matching wall top railings and returns to both piers, all fabricated as one job so the pattern and finish run right through.
Cantilevered steel balcony bolted back into the structure of a stone fronted house, with a welded deck tray, powder coated fascia and galvanised vertical bar balustrade to current guarding standards.
Silver grey steel railings running the length of a raised coastal terrace, topped with frameless toughened glass on stainless clamps so the sea view stays open while the edge is fully guarded.
Sliding driveway gate with spear top bars, a decorative mid band and cast collars, running on a bottom track between brick piers and finished in satin black to match the wall top railings.
Bar railings and matching pedestrian gate wrapping a corner front garden, raked to follow the falling footpath and finished in matte black for a long life outdoors.
Graphite grey bar railings with brushed stainless steel handrails to an external basement stair and open mesh ramp, base plated to the concrete and returned with wall mounted rails to the lower door.
Structural glass balustrade to a mezzanine edge, with fabricated steel posts, continuous top rail and stainless clamp fixings providing permanent edge protection.
Steel framed pedestrian gate with composite timber effect infill and stainless fixings, hung between plastered piers on adjustable hinges with a key locking barrel.
Hot dip galvanised handrails and balustrade to external steps linking a patio to the upper garden, with a matching galvanised plant enclosure screen beneath the flight.
Vertical bar balustrade and tubular handrails to a concrete stair core, welded up in flights, core fixed to the treads and returned into the block wall ahead of the fit out.
Arched top steel gate spanning a sunken service yard with a matching curved brace panel, alongside a fabricated external access stair and guarding fixed to the retaining walls.
Full length steel access ramp to a private house, with checker plate deck, level landing at the door and double height handrails to both sides, all fabricated in the workshop and installed in a day.
Compact checker plate ramp and platform to a fire exit door, with tubular steel guardrails and a shallow gradient threshold for step free escape.
Solid plate garden gate rolled to suit an existing brick arch, with banded rails, a lever lockset and a hand made brass rose and leaf roundel as the centre piece.
Wide pair of estate style entrance gates with hand formed scroll topping and matching centre panels, hung between castellated stone piers on drop bolts and a heavy centre latch.
Contemporary cantilever sliding gate built on a galvanised steel frame and clad in vertical cedar boards, running on a concealed track to sit flush with the rendered boundary wall.
One off decorative pieces built in house: a lattice Eiffel Tower sculpture and a pair of steel telephone box replicas, plasma cut, hand welded and dressed.
Send us drawings, a sketch or a site photo. We come back with a fixed price and a firm lead time, usually within one working day.
