Structural steel for extensions in Kildare
Kildare is one of the counties we deliver to most, mainly because the workshop sits on the Naas Road with a straight run down the N7. That short trip changes what is practical on a Kildare extension, particularly around delivery timing.
The typical Kildare job
Most of what we make for Kildare houses is extension and attic steel: a beam or pair of beams over a wide rear opening, a ridge beam for a dormer, posts carrying a corner where two openings meet. Celbridge, Maynooth, Leixlip and Naas generate a steady stream of this work as older estate houses are opened up at the back.
Rural sites are different again. Longer spans are more common because there is room for a bigger footprint, and steel frames for garden rooms, garages and light agricultural buildings come up regularly.
Delivery from Dublin 22
North and mid Kildare is comfortably inside an hour from the workshop, so we can usually hit a specific morning slot rather than giving a vague day. That matters when a hired crane or telehandler is on site for a limited window.
For rural entrances, narrow lanes or soft ground, tell us at quote stage. We size the load and the vehicle to the access rather than turning up with something that cannot get in the gate.
Certification and paperwork
Kildare County Council building control, like every other authority, expects structural steel to come with the right documentation. We fabricate under EN 1090-1 EXC3 and ISO 9001:2015, so each job leaves with its declaration of performance and CE marking.
That paperwork travels with the steel rather than being chased afterwards, which keeps the certifier moving when they come to sign off the works.
Getting a price
Send us the engineer's drawing along with the delivery address and the week you need the steel. We come back with a fixed price, normally within one working day.
If the drawings are not finished yet, a budget figure from a sketch and a span is usually enough to let you plan the build cost.
Want this priced for your own job? Send us your drawings or a photo and we will come back with a fixed price, usually within one working day.
Common questions
Need this done properly? Talk to the workshop.
Send us drawings, a sketch or a site photo. We come back with a fixed price and a firm lead time, usually within one working day.